Product Description

Tough Nylon Can't Scratch Your Rifling

The tough nylon coating on these rods absolutely won’t scratch the delicate rifling of the finest match barrel and won’t peel off like many vinyl coatings do. Smooth turning, ball bearing handle. Supplied with Adapter for standard 8-32 male thread brushes and accessories (Except .17 and 20 caliber rods; they are 5-40 female). Plus, an extra-long Dewey Jag that takes a patch either wrapped-around, or over-the-end, and fits directly onto the rod’s male thread. 17C and 20C series rods do not include brush adapter. Use of breech or muzzle bore guide recommended.

SPECS: Handles are 1-1/8" (2.9cm) dia. x 2-7/8" (7.3cm) long. The number following the dash in the model number represents the rod length in inches, 1"=2.5cm. 17C rods fit .17 caliber 20C rods fit .20 cal-.22RF. 22C rods fit .22-.26 caliber 30C rods fit .27 caliber and up. 38C-12 fits .27 caliber and up handguns. Length is indicated by Factory part number suffix instead of just suffix number i.e. 11=11 inches etc.

Product Description

The Bore Tech Proof Positive Bore Stix feature a proprietary alloy ferrule which eliminates any false indication of copper fouling in your bore. This paired with a new chemically resistant coating make the Proof Positive rods some of the finest available. Proof Positive Bore Stix feature caliber-specific steel cores with a cushioned ball bearing handle, which effortlessly follows your barrel rifling. The ergonomic, cushioned handle prevents any damage to your rifle stock. Proof Positive Jags sold separately. Here’s a list of Proof Positive Bore Stix features: - Proprietary alloy and secondary treatment process eliminates false copper reading - As soft and safe as brass with exceptional strength to prevent damage during use - Female ended ferrule is machined to provide an edge-free transition between rod and Proof Positive Jag. Eliminates the need for adaptors. - Highly advanced rod coating that provides anti-wear characteristics and prevents debris from embedding - Ergonomic, cushioned handle with an unparalleled ball bearing system.

All .17 & .20 caliber rods use 5-40 threads.  All others are 8-32.

Product Description

One-Piece Brass; Easy To Take Along

Simple, one-piece brass rod with a finger loop on the end. Perfect for the range and mighty handy on the bench, too. Includes brass slotted tip. Fits .22 caliber and larger barrels.

Product Description

Spring steel cleaning rods push a brush or jag through the toughest fouling without bending. Dirt and grit won’t cling to the proprietary, nonembedding coating for extra protection of your prized rifle’s bore. The machined aluminum handle is slim enough to avoid contact with the stock when cleaning from the breech, while still comfortable and easy-to-grasp for excellent control. Bearings at each end of the handle let the rod rotate smoothly to keep the jag or brush fully in contact with the rifling. Color-coded handles help you make sure you pick up the correct-caliber rod. Each rod has a soft aluminum ferrule at the threaded end to help protect the breech or muzzle from damage.

SPECS: Rod – Stainless steel, nylon coated. Handle – Aluminum, anodized. Caliber-fits, lengths, and thread-patterns listed below.

Product Description

Steel & Aluminum Rods

Aluminum and steel rods for Handguns, Rifles and Shotguns. Handgun rod is one-piece with swiveling handle. Standard 8-32 thread for brushes, etc., comes with .22, .38 and .45 jags. Rifle rods are three-piece with swiveling handle. Standard 8-32 thread for brushes, etc. A Knob (jag) tip and Slotted tip are included. .22 Caliber rod works for .22 to .270. .30 Caliber rod works for .30-.35. Both can use larger/smaller jags, and brushes for other calibers. Shotgun rod - Aluminum only. Three pieces, does not swivel. Includes two slotted tips for .410 through 12 gauge. 5⁄16"-27 thread.

Product Description

Heavy, One-Piece Brass Or Coated

Heavy-duty, one-piece, all-gauge brass rod with a solid handle. 5/16"-27 male thread accepts the included universal brass patch loop. Included 5/16"-27 female adapter allows use of standard cleaning attachments.

Product Description

Tough, Strong, Can't Embed

Scratch-causing, particles of jacket metal, powder fouling and other crud simply can’t embed in the hard, tough, stainless steel of these rods. Ball bearing handles and a universal, brass patch loop.

Product Description

All-Aluminum Components Eliminate "False-Positive" Copper Fouling Indications

Cleaning rods, brushes, jags, and adapters have machined aluminum components that don’t react with ammonia-based solvents like brass parts sometimes do. Won’t produce blue-green stains on your patches that can be misinterpreted as “false positive” indications of copper fouling, so you’ll know when your bore really is copper-free. Similar in hardness to brass, Copper Eliminator parts won’t scratch the bore or damage the muzzle, and they’ll stand up to hard use. Top-quality steel rods have the same tough, nylon outer coating and ball-bearing smooth rotating handle as standard Dewey rods, with an 8-32 female threaded aluminum ferrule. Each rod comes with an aluminum Copper Eliminator jag.

SPECS: Steel rod, black nylon coated, with aluminum fittings and red plastic handle. 8-32 female threads. Available in 36", 40", and 44" lengths. Jag included.

Product Description

Collapsible Rod Carries Easily In The Field; Clears Obstruction Fast

Segmented aluminum tubing with internal stainless steel cable assemble quickly into a rigid cleaning rod for emergency field use. Collapses into a compact package only 5" long. A must-have for dislodging snow, ice, mud and other bore obstructions you could encounter on remote hunting trips. Also comes in handy for loosening stuck cases, shotgun shells or wads. Fits .22 to .54 caliber barrels up to 26" long, 20 to 10 gauge shotgun barrels up to 32" long; plus .410 and 28 gauge barrels up to 26" long. Knurled handle with tension adjustment shaft draws cable tight to lock rod segments in place. Includes a plastic patch loop (.22 caliber), five aluminum jags (.22 to .54 caliber), and nylon carry case with belt loop.

SPECS: Aluminum, natural finish with stainless steel braided cable. 8-32 tpi female thread. OAL - 39" (99cm). Rod Section - 26" (66cm) long x .21" (5.3mm) diameter. Handle - 7" (17.8cm) long x ½" (1.3cm) dia. 2 oz. (56.7g) wt. Includes plastic loop, (5) jags, and carry case.