Mauser 98 Single Set Adjustable Trigger Necg
Mauser 98 Single Set Adjustable Trigger Necg.
Works In Conventional Or Set Trigger Mode
Self-contained, dual-mode trigger module upgrades a Mauser 98 to a highly adjustable conventional trigger with a 2 to 4½ lb. pull weight or, when you press the shoe forward, to an ultra-light, clean-breaking 4 oz. set trigger. Pull weight, sear engagement, pre-travel, and overtravel are fully adjustable by turning Allen head screws and then locking the settings by tightening the brass locking screws. Wide, grooved, deeply curved trigger shoe gives excellent sensitivity and control. The entire trigger unit secures to the receiver with a steel bolt and nut for more stability than the original push pin. Gunsmith installation recommended.
Big Book Catalog, Issue:71, Page:167
SPECS: Steel, blued. 3⁄8" wide shoe. 2 to 4½" lb. pull weight with 4 oz. set trigger pull weight. Requires minor inletting of stock and triggerguard slot for proper fit. Installation instructions included. Gunsmith installation recommended.
Savage E-Z Pull Trigger Rifle Basix.
Match Quality, Drop-in, For Rifle & Pistol
Investment cast from tool steel, then heat treated for consistent release and reliable operation. Three-way adjustable, steel triggers provide a clean let-off, free of creep and overtravel. Completely adjustable for pull weight, sear engagement and overtravel. Drop-in fit duplicates factory trigger installation, uses existing safety and pivot pin; installation takes only minutes, requires no modification to action or stock. SAV-1 has pull weight adjustable from 3 lbs. down to 11⁄2 lbs.
Big Book Catalog, Issue:71, Page:165
Sinclair, Issue:5B, Page:256
Arisaka Triggers Timney.
Hardened Steel Internals For Smooth, Light Pull
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight (FW) features the same adjustments and hand fitting as the Deluxe but no safety.
Big Book Catalog, Issue:71, Page:166
Sinclair, Issue:5B, Page:257
SPECS: Aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250" (6.3mm) wide shoe, except Arisaka and Mosin Nagant have .19" (4.7mm) wide shoe. Mauser 98K set 1⁄4" forward to fit short, 1.75", triggerguards. Fits stock, military rifles marked KAR. Mauser 98 Commercial fits actions that cock on opening and have a 2" long trigger guard. Swedish Military Mauser 96 has 1⁄4" longer trigger shoe, fits un-modified military rifles that cock on closing the bolt. Swedish 96/Spanish 95 Custom Stocked Mauser has 1⁄4" shorter trigger shoe to fit actions that cock on closing the bolt and are equipped with commercial stocks.
Mp5 Trigger Group, Nt, W/ext. Heckler & Koch.
Hi-Speed National Match Trigger Set, Large Pin Geissele Automatics Llc.
Hi-Speed National Match Triggers - Large Pin Series
Geissele Automatics currently offers three large pin Hi-Speed trigger products. These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference.
The Geissele Service Trigger:
The Geissele Hi-Speed Service Rifle Trigger is designed for NRA High Power Service Rifle competition. It is an approved trigger for use in CMP sanctioned competitions such as: National Trophy, NTIT and all Excellence In Competition matches. Service Rifle competitions require military-based weapons to meet certain criteria, one of which is a minimum trigger pull weight of 4.5 lbs. Our Service Rifle Trigger includes our exclusive 5-Coil trigger spring which will give a nominal 4 lbs. on first stage. The Service trigger pull weights are biased with most of the pull weight on the first stage. This will allow a light second stage with an icicle-sharp break, effectively giving your weapon a match-grade trigger let-off.
The Geissele DMR Trigger:
The Geissele Hi-Speed Designated Marksman Rifle Trigger is designed for tactical and military shooting where trigger pull weight is not regulated. Perfect for all precision tactical shooting and squad Designated Marksmen, the higher second stage weight helps in high-stress shooting situations.
The Geissele Match Trigger:
The Geissele Hi-Speed Match Rifle Trigger is designed for NRA High Power Rifle competition with highly modified AR-15 Space guns. AR-15 Space guns are the Formula 1 weapons of High Power Rifle competition. With very few restrictions, these highly customized semi-automatic weapons are intended to produce extreme accuracy at long range. The Geissele Match Trigger is a perfect Space gun add-on as the pull weight can be adjusted to low levels that enhance trigger control. The fast lock time assists the shooter in getting every ounce of accuracy out of his weapon. The Hi-Speed hammer uses a full-power hammer spring which imparts more kinetic energy into the firing pin, producing much more consistent primer ignition - especially with experimental cartridges or AR-10 based weapons.
Ar-10 /.308 Trigger Straight Elftmann.
Enhance Your AR-Style .308
The Elftmann Tactical AR-10 / .308 Straight Trigger is specially designed to stand up to the heavy recoil produced by short-action cartridges in the AR-style .308 platform, ensuring that owners have a trigger system they can depend on, round after round.
The Elftmann Tactical AR-10 / .308 Straight Trigger is machined and assembled with a combination of A2 tool steel and aircraft-grade aluminum. The trigger assembly also features needle bearings on hammer and trigger pivot points for smooth operation, and the hammer spring is double-wound from .043-inch piano wire in order to provide a more rapid lock time.
- Drops into all standard AR-style .308 lower receivers (Large pin Colt available)
- Adjustable pull weight from 2.75-4 pounds
- Built with 1/4-inch disconnector for added resistance to wear
- Installs with standard trigger pins
The Elftmann AR-10 / .308 Straight Trigger provides owners with a short trigger takeup and reset, providing enhanced accuracy and improved follow-up shots.
Big Book Catalog, Issue:71, Page:028
Scar 17s Trigger Timney.
- Drop in trigger for the FN SCAR-17S, 3.5lbs Non Adjustable
- Not for the 16S (use 883-000-043 for SCAR 16S)
- Stronger hammer spring for use with 308 ammunition
- Smooth, crisp, single-stage trigger pull
- Hammer is EDM machined from S7 tool steel
- Hammer is also Teflon-nickel plated for lubricity
- The lightweight, 6061 T6 alloy housing is anodized for superior durability
- Other components are EDM cut from A2 tool steel, then heat treated to RC 56-60 for long service life
- Trigger Module installs using your rifle's original hammer/trigger pins, no fitting or adjusting required
- Precision machined components ensure reliability and an excellent 3 lbs single stage trigger pull
- Each trigger is hand assembled, tested, and calibrated to the SCAR rifles at the factory
- Simple upgrade for the stock SCAR trigger
Big Book Catalog, Issue:71, Page:166
SPECS: Fits - SCAR 17S 308 Rifles.
Sig Sauer Mcx M4 Curve Trigger Geissele Automatics Llc.
Two-Stage Trigger Suitable for Precision Shooting & Run-and-Gun Scenarios
Ideal for CQB and mid-range carbine work, the Geissele Super MCX SSA M4 Curved Trigger upgrades your SIG Sauer MCX carbine to a two-stage pull with a fixed 4½ lb. total pull weight. The first stage builds gradually to 2½ lbs, followed by a 2 lb. second stage with a clean, crisp, smart let off. A full-power spring drives the lightweight hammer forward at high velocity to speed up lock-time and deliver reliable ignition of all types of ammo. Fast reset ensures you’re ready for that critical follow-up shot without losing focus on the target.
This Geissele MCX Super SSA trigger has a .285" wide trigger face with a smooth surface curved to replicate the contour of the standard mil-spec M4 trigger, so you can supplement the SSA’s upgraded performance with a familiar "feel." Other variants available with a flat face that some target shooters prefer or a differently curved ("Geissele curve") shoe.
- Versatile: suitable for hunting, competition, law enforcement & military applications
- Pull is light enough for precision applications, but forgiving enough for fluid scenarios like CQB
- Ready to install: remove your rifle’s current trigger, swap in the Super MCX SSA
- Complete kit with trigger, hammer disconnect, stainless steel outer shell, and all necessary pins & springs
- All critical components have precision-machined contact surfaces and a hard, wear-resistant black Nitride finish
Geissele’s MCX Super SSA M4 Curved trigger brings the precision, smoothness, and reliability of their original AR-15 Super Semi-Automatic trigger to the SIG Sauer MCX rifle. Optimized for both deliberate, aimed fire and snap shooting, it is a combat/competition-ready upgrade for your SIG Sauer carbine.
Big Book Catalog, Issue:71, Page:164
Ar-15/m16 Armageddon Trigger Replacement J P Enterprises.
This M4 Replacement Kit includes the Revolution trigger along with a selection of optional springs to achieve a variety of release weights depending on your application. The combination of our unique trigger with its improved sear geometry and the roller trigger, this kit is an ideal drop-in trigger for any M4 or AR-type rifle. At a price much lower than any other trigger solution, this kit along has been shown to yield a smooth roll-off feel that allows for consistent shot placement when accuracy is required.
The springs included with this kit include the yellow hammer and trigger springs, which may be used for competition and recreational applications with hand loads or domestic made non-military ammunition. The yellow/yellow combination results in a release weight in the 3.0-3.5 lb range on most receivers. Also included is the red hammer spring for use with military (5.56 NATO) or foreign-manufactured ammo with low-sensitivity primers. The red hammer spring MUST be used on any tactical duty (LE) installations and any AR-10 type installation for 100% ignition reliability. The yellow/red combination results in a release weight of 3.5-4.0 lbs on most receivers.
Notice: This replacement kit is for standard AR triggers. It has no adjustable features and so is not suitable to replace any existing JP adjustable triggers—standard or EZ.
SPECS: Fits AR15/M16 models.