Web Analytics Made Easy -
    StatCounter

10/22® Bx-Trigger Ruger

If you find product , Deals.If at the time will discount more Savings So you already decide you want have 10/22® Bx-Trigger Ruger for your, but you don't know where to get the best price for this 10/22® Bx-Trigger Ruger . We already done the research and spend a lot of time for you. 10/22® Bx-Trigger Ruger to find out where to get the best deal on 10/22® Bx-Trigger Ruger.

Content:

10/22® Bx-Trigger Ruger.

$74.99
The 10/22® BX-Trigger™ features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel. Rugged, reliable and safe (meets or ...

Product Description

The 10/22® BX-Trigger™ features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel.  Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install.  The BX-Trigger™ features a Polymer construction and drop-in installation.  Fits Ruger® 10/22® rifles or 22 Charger Pistol. 

DO NOT DRY FIRE UNLESS A HAMMER BLOCK IN INSTALLED OR TRIGGER IS INSTALLED IN A RUGER® 10/22® RIFLE.


Big Book Catalog, Issue:71, Page:154

Agent Night Sight Set For Glock® Ameriglo.

$120.00
AmeriGlo’s Agent night sight set for Glock® is a major step forward in night sight design that delivers improved visibility and faster ...

Product Description

Duty/Carry Sights for Operation in Any Light Conditions

AmeriGlo’s Agent night sight set for Glock® is a major step forward in night sight design that delivers improved visibility and faster sight acquisition in any lighting conditions. These are low-profile, fixed sights designed to meet the daily carry needs of law enforcement officers. In fact, Agent sights were recently selected by a large federal law enforcement agency as its carry sight of choice.

AmeriGlo Agent sights for Glock® employ the proven 3-dot configuration preferred by many experienced shooters. The ProGlo style front blade has a vivid green Tritium lamp surrounded by a bright orange outline, so there’s no trouble identifying your front sight under stress. The fixed rear sight has a rounded U-notch flanked by two green Tritium lamps with subdued black outlines.

  • Drop-in replacements for factory sights
  • Swiss-made self-illuminating Tritium lamps are backed by a 12-year warranty
  • Rear U-notch (all): .165" wide
  • Front sights: .140" wide (G42,43 is .125" Wide)
  • Glock® 9mm/.40 S&W/.357 SIG front: .180" high
  • Glock® 10mm/.45 ACP front: .165" high
  • Glock® 42/43 front: .190" high
  • Gen5 sights fit all models of Glock Gen5 pistols ONLY (front: .200" high)

AmeriGlo Agent night sights are machined from high-grade steel barstock, dehorned to prevent snagging on your clothing during the draw, and given a durable, non-reflective black finish to match your Glock’s slide. Even so, the rear sight body is shaped to support one-handed slide racking in an emergency.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Big Book Catalog, Issue:71, Page:316

Rmr Cut Slide For Gen3 Glock® 9mm Brownells.

$229.99
Brownells Front Cut RMR Slides for Glock® pistols feature a distinctive, wraparound serration pattern that aids in manipulating the slide, especially when ...

Product Description

Stainless Steel Slide With a Bundle of Custom Features

Brownells Front Cut RMR Slides for Glock® pistols feature a distinctive, wraparound serration pattern that aids in manipulating the slide, especially when checking the chamber. (OK, we’ll admit it: the serrations look cool, too.) They also come with a pre-cut slot for easy, secure, low-profile mounting of a Trijicon RMR sight. All slides equipped with standard Glock sight cuts for front and rear sights of your choice.  If the RMR is in place, suppressor height sights are required.

In addition, you can get your Front Cut RMR Slide with an optional "window" cutout on top between the front serrations that reduces weight and enhances airflow to keep the barrel cooler - ideal for hard-working action competition pistols.

Each Front Cut RMR Slide starts life as a billet of 17-4 stainless steel that is machined to Glock® factory specifications inside, so it’ll fit factory frames and accept factory or aftermarket barrels and parts.

  • Fits Gen3 Glock® 17 and 19 pistols & components
  • Available with distinctive top window cutout or traditional solid top
  • Machined from corrosion-resistant 17-4 stainless steel billet
  • Heat Treated to 41-44 on the Rockwell C scale
  • Given a wear-resistant matte black Nitride finish
  • Pre-cut Trijicon RMR mounting slot, plus factory front/rear sight cuts

A Brownells Front Cut RMR Slide is the ideal upgrade for your factory Glock 17 or 19 pistol - and the perfect top half for a new custom gun built on an 80% frame.

Channel liner required for these slides.  Channel liners are a press fit and require a tool to install.


Big Book Catalog, Issue:71, Page:214

Ar-15 Super Sport Trigger Rise Armament.

$119.00
The Rise Armament Super Sporting Trigger is one of the most cost effective trigger on the market for AR based rifles. ...

Product Description

Shrink Your AR s Groups With A Cost Effective Single Stage Trigger

The Rise Armament Super Sporting Trigger is one of the most cost effective trigger  on the market for AR based rifles.  

  • Precision CNC machined from high quality, heat treated tool steel and aluminum
  • Single stage 3.5 pound trigger break
  • Unit weight: 2.3 ounces.

You can easily replace the factory Mil-Spec unit with the Rise Armament Super Sporting Trigger, a precision CNC machined drop in trigger that boasts a crisp, clean 3.5 pound trigger break.

Gen 5 Magazine For Glock® G17/19x Glock.

$23.99 - $36.99
These are genuine Glock® factory replacement magazines for Gen5 Glock® 17 / 19X / 34 pistols. A hardened steel insert encased in ...

Product Description

Factory Spares for Your Gen5 - Also Compatible With Earlier "Gens"

These are genuine Glock® factory replacement magazines for Gen5 Glock® 17 / 19X / 34 pistols. A hardened steel insert encased in slick, wear-resistant polymer gives each Gen5 magazine impressive strength and durability. The difference is the polymer for these mags is molded in Glock’s desert-ready Coyote color.

You can choose between a standard (for full-size 9mm Glocks) 17-round capacity or a 19-round capacity. Competition shooters, law enforcement folks, and tactical operators will love the "Plus 2" option!

Inside, the contrasting black follower makes keeping track of load status through the plentiful witness holes easier, while the extended, angled baseplate helps with those fast magazine changes.

  • Correct, factory-original spare mag for your 9mm Gen5 pistol
  • Available with standard 17-rd or 19-rd capacity
  • "Desert" color matches the 19X pistol frame & slide
  • Black self-lubricating polymer follower
  • Witness holes on rear face

These Glock® 17 / 19x / 34 magazines are contoured at the base to match the flared magwell of Gen5 pistols, yet are still fully compatible with earlier-generation pistols.

Standard Velocity Ammo 22 Long Rifle 40gr Lead Round Nose Cci.

$2.99 - $49.99
CCI is known in the shooting sports industry for having reliable rimfire ammunition that delivers exceptional performance time and time again. ...

Product Description

CCI is known in the shooting sports industry for having reliable rimfire ammunition that delivers exceptional performance time and time again.

CCI Standard Velocity ammunition is loaded to the same velocity as CCI Green Tag and Pistol Match ammunition but priced less to help keep your training budget in line. The clean-burning propellant helps keep semi-automatic actions clean for longer shooting sessions. Can be used for plinking or competition training. This ammunition is new production and non-corrosive.

Shipped as individual boxes.

Ammo
WARNING
You must be 18 or older to purchase shotgun or rifle ammunition and 21 or older to purchase handgun ammunition. All ammunition must be shipped Domestic Ground. Shipping not available for International residents. Residents in CA, DC, DE, IL, MA, NY, CT, NJ and OH may have additional restrictions. Always make sure you use the correct ammunition for your firearms. Check your state and local laws for any other applicable firearms and ammunition regulations. Due to Department of Transportation regulations, we cannot accept returns on ammo. Please check local laws before ordering. View full restrictions here.

Ammunition pricing is per box.

ATTENTION – California Customers
Brownells is still shipping ammunition orders to California but the process has changed to comply with California Proposition 63. We must now ship ammunition purchased online to an FFL or California-approved ammunition dealer. After placing your order, a Brownells representative will contact you to ensure your ammunition arrives quickly and in compliance with the law.

M16 5.56 Lightweight Bolt Carrier Group Brownells.

$119.99 - $139.99
The Brownells M16 Lightweight Bolt Carrier Group is purpose-built for AR-15 owners looking to improve aspects of their rifle with a ...

Product Description

Designed for Lightweight, Low-Recoil Rifles


The Brownells M16 Lightweight Bolt Carrier Group is purpose-built for AR-15 owners looking to improve aspects of their rifle with a simple component swap, eliminating the need for major component replacement or amateur gunsmithing work.

The Brownells M16 Lightweight Bolt Carrier Group is machined from 8620 tool steel and features a heavy-duty bolt made using 9310 tool steel, which is then magnetic-particle inspected to ensure quality. The bolt is light enough to reduce the overall weight of a lightweight AR build, and the lightness of the entire assembly also reduces the felt recoil of any AR-style firearm.

  • Available with nickel-boron, titanium-nitride or nitride finishes
  • Weighs 8.2 ounces
  • Compatible with AR-15s chambered in 5.56 NATO, .223 Rem., 300 Blackout and .204 Ruger

The Brownells M16 Lightweight Bolt Carrier Group ships completely assembled and features the necessary black insert and O-ring around the extractor, as well as a torqued and staked gas key.
 

Pf940cv1 80% Frame Textured For Glock 19/23/32 Polymer80.

$142.99 - $157.99
The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular ...

Product Description

Ergonomics Meets Customization

The PF940Cv1 is Polymer80’s next generation of polymer 80% frames for Glock® handguns, bringing improved ergonomics, features and looks to the popular Polymer80 frames.  

The PF940Cv1 allows Glock® 19, 23 & 32 owners to create a customized handgun, exactly suited for any application. Available in three configurations: standard PF940Cv1 with textured grips. PF940Cv1-ReadyMod with blank grips for custom stippling - the customization possibilities are endless. PF940Cv1-BE is available ONLY at Brownells and comes with aggressively textured grips that will give you a firm hold on your pistol under any conditions.

  • Compatible with Gen3 Glock® Components. Not Compatible with Gen4
  • Improved next generation ergonomics make for a great shooting pistol
  • High strength reinforced polymer construction provides a great basis for a reliable & durable gun
  • Aggressive texture on the PF940Cv1 ensures positive retention
  • Picatinny rail is compatible with all standard lights, lasers & accessories
  • Stainless steel locking block ensures positive operation & a lifetime of use
  • Stainless steel drop-in rear rail module interfaces with the slide and holds up to hard abuse
  • Hardened front and rear rail system pins ensure slide/rail/frame interface is rock solid
  • Includes complete finishing jig
  • Jig includes drill bits and end mill, allowing for complete construction

The 80% frame features are carried over from the original Polymer80 frames, making your build incredibly straightforward to complete. New grip profiling and improved overall design, make this not only an easier frame to operate and shoot, but looks great mounted to your favorite slide.

The PF940Cv1 is compatible with Glock® 19/23/32 frame components.

Returns will not be accepted once the receiver is modified in any way. All warranty issues will be directed to the manufacturer.

 

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Big Book Catalog, Issue:71, Page:216

Ar-15/m16 Upper Receiver Action Block Brownells.

$59.99 - $79.99
Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them ...

Product Description

Protect Receiver From Damage When Clamping

Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiver. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish. 

DO NOT USE ON BILLET UPPERS OR LEFT HAND UPPERS, OR DAMAGE TO THE UPPER CAN RESULT.


AR-15, Issue:11, Page:082
AR-15, Issue:11, Page:083
AR-15, Issue:11, Page:085
Big Book Catalog, Issue:71, Page:084
Big Book Catalog, Issue:71, Page:085
Big Book Catalog, Issue:71, Page:088
Sinclair, Issue:4S, Page:023

SPECS: Injection-molded Rynite, black. Fits A1, A2, and standard flattop receivers. Block - 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert - 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. lbs.

Leave a Reply