Web Analytics Made Easy -
    StatCounter

10/22® Drop-In Trigger Assembly Timney

"Today, if you do not want to disappoint, Check price before the Price Up.10/22® Drop-In Trigger Assembly Timney You will not regret if check price."  low price 10/22® Drop-In Trigger Assembly Timney

Content:

10/22® Drop-In Trigger Assembly Timney.

$223.84
The Timney 10/22® trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger® 10-22® ...

Product Description

  • The Timney 10/22® trigger will undoubtedly set the standard for the future of aftermarket trigger upgrades for the Ruger® 10-22®
  • Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the Timney trigger for the Ruger® 10-22® is a complete action replacement
  • The trigger, sear, and hammer are wire EDM cut and heat treated steel for exceptional durability
  • Push out the two action pins and "drop in" the Timney complete trigger assembly
  • The Timney 10-22®trigger features a Timney designed extended magazine release that can be operated by one finger for exceptional ease and accessibility
  • It also comes standard with an auto bolt release
  • As with all the Timney triggers made in the U.S.A. each complete action replacement is hand assembled, calibrated and tested for a lifetime of reliable service
  • The trigger is set at 2 pounds from the factory, with no creep


Big Book Catalog, Issue:71, Page:155

Sportsman Trigger Timney.

$55.44
CNC machining and advanced metallurgy provide a durable, reliable replacement trigger for stock military and sporterized Mauser, Springfield and Enfield rifles. Adjusts ...

Product Description

Hardened Steel Internals Give A Smooth, Light Pull

CNC machining and advanced metallurgy provide a durable, reliable replacement trigger for stock military and sporterized Mauser, Springfield and Enfield rifles. Adjusts for pull weight, (2-4 lb.), creep and overtravel. Lock nuts hold settings. Excellent replacement for that heavy military trigger. No safety.


Big Book Catalog, Issue:71, Page:166
Sinclair, Issue:5B, Page:257

SPECS: 6061 T6 aluminum housing. Heat-treated steel internals. Polished sear/trigger surfaces. Serrated .250" (6.3mm) wide shoe. M91-4 has longer trigger shoe to fit un-modified military rifles. M98-K and M91-4K sets ¼" forward to fit short, 1.75", triggerguards. Fits stock, military rifles. M98-FN-SP fits Mauser 98, Brno, Mexican 98, Yugo 48, H&R 300, Commercial, Browning 400, Siamese, Turkish, Not reccommended for MKX.

Ar-15/m16 Gold Trigger Module American Trigger Corporation.

$279.95 - $279.99
Self-contained trigger/assembly installs in minutes and delivers a light, smooth, match-grade trigger pull free of grittiness, with an ultra-crisp letoff and short reset. ...

Product Description

Drop-In Fire Control System Gives A Light, Safe, Match-Grade Pull

Self-contained trigger/assembly installs in minutes and delivers a light, smooth, match-grade trigger pull free of grittiness, with an ultra-crisp letoff and short reset. Simply remove factory trigger and safety selector, drop in the module, reinstall selector and pins, and you’re ready to shoot. Completely new engagement geometry produces a light 3-lb. pull and crisp release without compromising reliability or safety. The two-stage design is adjustable for sear engagement, with a first-stage takeup of approximately 6 ounces, followed by actual sear movement taking up the rest of the weight—the reverse of the military two-stage AR trigger pull profile. Instead, the shooter can build force steadily, maintaining precise control and keeping his attention on the target. After release, reset travel is only .030", less than half the .070" typical of standard match triggers, to aid in fast, accurate follow-up shots. The sear captures the hammer at the back instead of near the pivot point to help produce the light pull and maintain safety. A second, independent, intercepting sear is positioned to block the hammer if it slips off the primary sear, as when the weapon is dropped or suffers hard impact. If the intercepting sear captures the hammer, pulling the trigger will still fire the rifle, though with a heavier pull weight. In addition, the Gold system uses the rifle’s factory safety to positively capture the hammer, like an M1 Garand, and roll it back below the primary sear for an extra margin of safety. A lightweight aluminum housing contains the entire system and maintains the correct tolerances between the working parts. The receiver pins serve only to anchor the module in the receiver, with no effect on trigger function.


AR-15, Issue:11, Page:027
Big Book Catalog, Issue:71, Page:027
Sinclair, Issue:5B, Page:255

SPECS: Trigger/Hammer – Wire EDM cut S7 tool steel. Housing – Aluminum, anodized, black. AR Gold fits any mil-spec AR-15 with .154" trigger and hammer pin holes. Will not fit rifles with Colt-type sear block or AR-style .308 rifles.

Remington 700 Calvin Elite Triggers, 2-Stage Timney.

$183.41 - $192.77
Self-contained drop in trigger. Lightweight 6061-T6 CNC Machined aluminum housing with Wire EDM cut, Heat treated Tool steel ...

Product Description

  • Self-contained drop in trigger.
  • Lightweight 6061-T6 CNC Machined aluminum housing with Wire EDM cut, Heat treated Tool steel trigger and sears.
  • Featuring a double sear design.
  • Two position, trigger blocking side safety.
  • Fully adjustable Sear Engagement, Over-travel, and pull weight from 8oz.-2.5lbs.
  • Available in blue(black) and Nickel Plated.
  • Teflon nickel coated Sears to guarantee a lifetime of reliable service.


Big Book Catalog, Issue:71, Page:166

Ar-15 Edt® Series Trigger Assemblies Hiperfire.

$94.05 - $141.55
Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a ...

Product Description

Smooth, Consistent, Medium-Weight Pull - BIG Improvement Over G.I. Trigger

Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reliability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger geometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes.

Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger.

  • Single-stage with minimal creep
  • 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight
  • SwingFast Hammer Head™ gives unusually fast locktime
  • Extra-power hammer spring for positive hammer strikes without increasing pull weight
  • Self-cleaning - designed to allow debris to fall out to prevent jams & reset problems
  • Fits small-pin (.153") AR-15 lower receivers & AR 308 rifles that use AR-15 triggers

Hiperfire offers the EDT trigger in four configurations: Sharp Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable hammer strikes.

The Designated Marksman has Hiperfire's Duplex Trigger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Enhanced Duty model is beefed up for full-auto select-fire AR-15 / M16 / M4 type rifles carbines; curved shoe.

Hiperfire made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it.  


Big Book Catalog, Issue:71, Page:030

Ruger Precision Rifle 2 Stage Triggers Timney.

$197.96
Timney offers this 2 stage trigger for the Ruger Precision Rifle. The pull weight is factory calibrated for an eight-ounce first stage ...

Product Description

Timney offers this 2 stage trigger for the Ruger Precision Rifle. The pull weight is factory calibrated for an eight-ounce first stage and one -pound second stage (the second stage is adjustable from 8-ounces to 2.5 pounds of pull weight)

The 2-Stage trigger features machined and hardened steel work surfaces and the sears are Teflon-nickel coated for added lubricity. The trigger housing and shoe are CNC machined using state-of-the-art robotics and the sears are EDM cut from high-grade solid steel.  The trigger housing utilizes an anodized aluminum body and the trigger shoe and safety are carbonitrided which dramatically increases the surface hardness and wear-resistance properties of the metal.

Does Not fit the rimfire Ruger Precision Rifles.


Big Book Catalog, Issue:71, Page:166

Featherweight Triggers Timney.

$80.75 - $175.46
Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep ...

Product Description

Hand honed and fitted for the ultimate in crisp, clean trigger pull. Adjusts for weight of pull (11⁄2 - 4 lb.), creep and overtravel. Lock nuts hold settings. Featherweight (FW) features the same adjustments and hand fitting as the Deluxe but no safety.


Big Book Catalog, Issue:71, Page:166
Sinclair, Issue:5B, Page:257

Remington 700 Triggers, Thin Timney.

$131.37 - $141.10
The Thin triggers are 1/4" in width and comes with a safety that blocks the trigger, not the sear. No screws, drilling, ...

Product Description

The Thin triggers are 1/4" in width and comes with a safety that blocks the trigger, not the sear. No screws, drilling, or tapping required.
 
This model will bring a whole new realm of accuracy to your Remington rifle Remington 700 Clone Action. Each trigger is geometrically identical with tolerances less than .0005”. adjustable from 1.5 to 4 lbs.

How is the Timney Remington 700 trigger different from the factory trigger? There are two major differences. The first is that the trigger and sear in the Timney Trigger Group is made from a solid block of heat treated steel, not casted nor metal injected, allow for closer tolerance and precision.
 
The second difference is that the Timney trigger comes with a trigger blocking safety; that means there's no way to move the trigger when it's on safe, so when you take it off safe the trigger stays in the same position it started from.


Big Book Catalog, Issue:71, Page:166

Fulcrum Ultimate Trigger Kits For Gen4 Glock® Zev Technologies.

$250.00
Convenient kits with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short ...

Product Description

Precise Letoff, Fast Rest, Fully-Adjustable For Takeup & Overtravel

Convenient kits with the performance benefits of a custom trigger job to give your Glock® an ultra-smooth pull, clean letoff, and short reset without impairing the reliability of the factory safeties. Fully adjustable for pre-travel and over-travel via two easy-to-access hex-head screws (wrench included), so you can tune trigger feel to your exact requirements for maximum control. Trigger shoe and trigger safety are precision machined from 6061 T6 aluminum billet for precise engagement, smooth movement, and superb responsiveness. Engagement surfaces on the stainless steel trigger bar are mirror polished for outstanding sensitivity and consistency. Basic Fulcrum trigger includes preassembled trigger shoe, safety lever, and trigger bar. Gen 4 Kits available for Gen 4 models 17/19 (9mm) and 22/23 (.40 S&W) pistols. ZEV Technologies recommends this for competition use ONLY.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.


Big Book Catalog, Issue:71, Page:234
Leave a Reply