Tacloc X-Series Holsters Viridian
Tacloc X-Series Holsters Viridian.
The TacLoc Laser-Ready Autolocking holster line features Kydex tactical construction, specifically designed to fit Viridian-equipped pistols. An integrated auto-lock system secures the weapon when it’s holstered, providing level II weapon retention. Equipped with ECR (Enhanced Combat Readiness) instantly ignites your Viridian Laser/Light the instant you draw your weapon. No delay, no fumbling for buttons, just more rounds on target in any situation.
Duty-ready TacLoc holsters are designed for performance and comfort in the mid-ride position professionals prefer. Fits popular firearms equipped with Viridian X-Series Laser/Lights (X5L, X5L-R, XTL, XTL-G, X5L-FDE).
Holsters only works when laser is attached to the pistol.
SPECS: X-Series Holsters Fit X5L, X5L-RS, X5L-R, XTL.
Classic Lite Shoulder Holsters Galco International.
The Classic Lite gives you all the comfort and versatility of our professional rigs, since we use the same connectors to achieve the same great fit and function, including our trademarked clover shape Flexalon™ swivel back plate. Using premium Center Cut Steerhide™ allows us to offer you a very reasonably priced alternative shoulder system with a proven track record. This system includes holster, harness, ammo carrier and a set of system screws. Like Galco's professional rigs, the Classic Lite is fully modular.
SPECS: Premium Center Cut Steerhide / Horizontal gun carry / Vertical ammo carrier with secure flap / Comfortable medium-width harness with swiveling Flexalon backplate / Accepts tie-downs/cuff case/flashlight accessory attachments.
Ar-15 Strike Triple Mag Pouch Holds 6 Blackhawk Industries.
Max Out on Backup Mags While Sacrificing the Bare Minimum of Pack/Belt Real Estate
The Strike AR-15 6-Mag Pouch from Blackhawk holds six - count ’em, 6 - USGI (or similar size) 30-round magazines in three separate pockets. Go into competition or combat with a half-dozen loaded mags in easy reach, while sacrificing space on your belt or pack normally taken up by three. The Strike AR-15 6-Mag Pouch attaches easily to any Blackhawk S.T.R.I.K.E. or PALS/MOLLE gear.
- Made of tough, wear-resistant 500-denier nylon fabric
- Top flap held shut by hook-and-look closure retains the mags in the pouch and protects them from the elements
- Grommets in the bottom allow fast drainage of water if pouch gets submerged
Blackhawk’s Strike AR-15 6-Mag Pouch is one piece of gear you want when you need plenty of backup ammo with no unnecessary bulk.
Instructors Gun Belt Blackhawk Industries.
Kydex-Reinforced To Support Holster & Gear
The Blackhawk Instructor's Gun Belt offers the wearer with an ultra-strong bases for attaching holsters, pouches and other tactical or duty equipment. Made of durable 1.75
- Parachute-grade buckles and adapters
- Nylon webbing has 7,000-lb. tensile strength:
- Kydex® stiffener supports holster and equipment
- Hook and loop fabric secures running end
Whether you wear the Blackhawk Instructor's Gun Belt with for casual or duty carry, jeans or khakis, it is designed to provide the extreme gear support you need for your equipment.
Eidolon Holsters Agency Kit For Glock™ Raven Concealment Systems.
The Raven Concealment Systems Eidolon Agency (Ambi) Kit is designed to allow government purchasers a simple, single-SKU solution for equipping large numbers of people. This package contains an ambidextrous holster shell along with every accessory and belt-attachment available. This eliminates the need to guess how many left-handed holsters might be needed for a large purchase, while also ensuring that every end-user gets the accessories best-suited to their build and carry-position. This kit is also a tremendous value, since its total price represents a nearly 15% savings compared to purchasing the accessories ala carte. Like the other Eidolon Kits, the Agency (Ambi) Kit is a tuckable, versatile, and comprehensive IWB/AIWB holster package that can be used with one or both belt attachments and give you hundreds of potential configuration options.
The Eidolon is the culmination of over three years of design and development. It is designed to be the most refined and functional inside-the-waistband holster on the market. At the core of the Eidolon is the holster shell. The shell is precisely fitted to the weapon on the inside and is smooth on the outside to work in conjunction with the body, belt, and clothing -in nearly any carry position- to maximize comfort and concealment. At the same time, the shell provides attachment points for a host of accessories to allow the user to tailor the holster for their specific carry needs.
The holster shells feature an innovative, adjustable retention feature that isolates the tension solely on the front of the trigger guard. This provides for an extremely clean “feel” when drawing and holstering - unlike other companies’ adjustable retention holsters which simply compress the holster body along the entire trigger guard and/or frame, resulting in a mushy feel as the pistol drags against the inside of the holster.
All Eidolon holster shells are fully compatible with most extended controls, factory and after-market sights of any height (including suppressor sights), any type of RDS mounted behind the ejection port, and most extended/threaded barrels.
The Agency (Ambi) Kit includes:
- One ambidextrous holster shell of your specification
- One pair of 1.5” overhooks
- One pair of 1.75” overhooks
- One pair of Tuckable Soft Loops
- One Tall Spacer for mounting the belt attachment below the trigger guard
- One set of Belt Claws
- Two Holster Wedges, one for right-hand and one for left-hand configurations
- Supplemental hardware kit
- Full instruction manual
- One set of eight hole extension wings
- One set of ten hole extension wings
The Glock 19/Universal model has a pass-through open bottom design and will fit any 3rd or 4th Gen. Glock 9mm/.40cal pistol. The holster shell itself is equal in length to a Glock 19 pistol. It is available in short or long body shield configurations.
The Glock 17 model has a closed bottom design equal in length to a Glock 17 pistol, but will fit any Glock 26/27/19/23/17/22 3rd or 4th Gen. It is available in short or long body shield configurations.
Tuckable Overhook Set: Fits 1.5” or 1.75” belts. Can be used as a pair or individually mounted to the holster shell. Overhooks offer two ride height positons 5/8” up or down, and approximately 15 degrees of cant adjustment, forward or back.
Tuckable Soft Loop Set: Can be used as a pair or individually mounted to the holster shell The polymer struts provide two ride height positions 5/8” up or down and approximately 15 degrees of cant adjustment forward or back. Soft Loops are adjustable, and will fit 1.25”, 1.5”, and 1.75” belts. The soft loop itself mounts in a slot to allow infinite ride height adjustment within the slot envelope. The loop itself can be rotated to allow infinite cant adjustments forward and back. Once tightened down, little nibs in the strut face lock the loop in place and prevent movement.
Tall Spacer Block: Used to mount the Overhook below the trigger guard to allow the Overhook to clear the holster shell and adjust for cant.
Belt Claw Set: This accessory sets the Eidolon apart from all other AIWB holsters on the market. The Belt Claw mounts to the side of the trigger guard area and juts out toward the belt line. As the belt is tightened, it pushes against the Claw and levers the grip of the weapon into the body. The shape of the Claw is designed to blend into the lines of the holster shell for comfort. It also works in conjunction with the angled sight-channel area to allow the holster to conform to the waistline and virtually disappear under cover garments. The serrations on the face of the Claw are meant to “grab” the pants material to minimize holster movement, but are blunted to prevent damage to clothing. Belt Claws come in sets and can be mounted angled up or down to best make contact with the belt line in any cant or configuration for both right and left handed shooters.
Holster Wedge: Designed to mount to the inside face of the holster shell toward the muzzle end, the Wedge will help lever the top and grip of the weapon into the body and maximize concealment especially in an AIWB configuration. The Eidolon Holster Wedge is optional, and can be removed if not needed. It is made from a special polymer which is soft enough for all day comfort, yet durable to last the lifetime of the holster.
Single Magazine Carrier Galco International.
The unique wrap-around design of the SMC™ features a one-way snap on back that fastens securely to your belt. It is an ambidextrous case constructed of premium saddle leather now featuring tension unit adjustment for custom fit. It will fit belts up to 1 3/4" wide and is available in a black or tan finish.
SPECS: Premium Saddle Leather / Fits belts up to 1 3/4".
Ple Paddle Holsters Galco International.
The thumb break retention strap satisfies departmental safety regulations and allows a swift draw when necessary. It also features Galco’s patented belt-lock copolymer injection-molded paddle. Like all Galco paddle holsters, the PLE Paddle can be easily attached or removed without taking off your belt. Constructed of premium saddle leather, the PLE Paddle fits belts up to 1 3/4".
SPECS: Premium Saddle Leather / Fits belts up to 1 3/4".
Enhanced Military Web Belt Blackhawk Industries.
Versatile Belt For A Variety Of Shooting Situations
Blackhawk Enhanced Military Web Belt is a great platform for attaching holsters, mag pouches, or other equipment. Made of extremely tough and stiff nylon, calling the Blackhawk Enhanced Military Web Belt "heavy duty" is an understatement.
Measuring 2-1/4" wide, the Blackhawk Enhanced Military Web Belt uses a hook-and-loop adjustment system for easy size changes, and the durable side release buckle stay securely locked. Belt is stiff enough to handle the heaviest loads.
- Durable nylon construction
- Polymer side release buckle
- Quick on & off capability
- Available in black, coyote tan and olive drab
A popular choice with members of the military, the Blackhawk Enhanced Military Web Belt stands up to the roughest treatment in the field.
Open Top Holster With Tension Screw Adjustment Hunter Company, Inc..
Open Top for Easy Access
The Hunter Holsters Open Top Holster ensures that handgun owners can carry their firearms securely while not having to worry about any impediment during a draw stroke, due to its hassle-free open-top design
The Hunter Holsters Open Top Holster is equipped with an adjustable tension screw located near the trigger guard that allows users to adjust the level of friction retention used on the holster. The interior is hand boned in order to provide a perfect fit and an ideal retention setup.
- Constructed from top-grain leather
- Only for right-handed shooters
- Comes in tan color
The Hunter Holsters Open Top Holster is designed for outside-the-waistband wear and features a reinforced holster mouth for easy reholstering.