Web Analytics Made Easy -
    StatCounter

Ar-15 Tactical Micro Rear Sight 300 Meter Knights Armament

Buy at this store.See Detail Online And Read Customers Reviews Ar-15 Tactical Micro Rear Sight 300 Meter Knights Armament prices over the online source See people who buy "Ar-15 Tactical Micro Rear Sight 300 Meter Knights Armament" Make sure the shop keep your private information private before you buy Ar-15 Tactical Micro Rear Sight 300 Meter Knights Armament Make sure you can proceed credit card online to buyAr-15 Tactical Micro Rear Sight 300 Meter Knights Armament as well as the store protects your information from fraudulents Make sure the customer support is obviously there to help you when you place Ar-15 Tactical Micro Rear Sight 300 Meter Knights Armament order with them

Content:

Ar-15 Tactical Micro Rear Sight 300 Meter Knights Armament.

$125.50
KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies ...

Product Description

KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies worldwide. This is because they are built to exacting tolerances, maintain their zero under adverse conditions and, when folded, have one of the lowest profile top-rail footprints in the industry.

The simple and rugged 300 Meter Folding Micro Rear Sight has a fixed post aperture, which  is ideal for shooters who want an easy to use, close to medium range back-up sighting solution. The 300 Meter Micro Rear Sight is adjustable for windage only, and includes a snap-in polymer aperture insert that gives the user a more precise sight picture if desired. 

Zeroing Tips 300 Meter Rear Sights: Place a target 25 meters down range and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, place a target 300 meters down range and confirm zero.
 

NOTE: Once zeroed by one of the above methods, the rear sight’s 200, 300, 400, 500, and 600 meter range marks may be used for engaging targets at those distances. However, because the range markings are averaged between rifle and carbine barrel lengths, the exact point-of-aim/point-of-impact sight settings may differ a click or two for a given rifle. If possible, fire your rifle at known distances and record your exact + or − clicks for each range. The rear sight’s intermediate clicks between major range markings may also be used to engage targets at ranges such as 250 meters, 375 meters, etc.


AR-15, Issue:11, Page:068
Big Book Catalog, Issue:71, Page:073

SPECS: Fits - Picatinny rails.  Adjustable sights are calibrated for 5.56x45mm NATO cartridge.

Rifle Model Mr-X Rear Sight Necg.

$100.99
Notched, "V"-style blade is fully adjustable for windage and elevation. Machined from solid steel, polished and blued to compliment the finest sporting ...

Product Description

Notched, "V"-style blade is fully adjustable for windage and elevation. Machined from solid steel, polished and blued to compliment the finest sporting rifle.


Big Book Catalog, Issue:71, Page:304

SPECS: Steel, polished, blued. 2-3/16" (5cm) long, .546" (13.8mm) wide, 1.6 oz. (44g) wt. .322" (8.1mm) from top of barrel to top of base. Solder-on or drill and tap for 8-36 screw.

Rifle Creedmoor Soule Short Range 2 Pedersoli Davide & C..

$204.99
Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and ‘80s, the Creedmoor ladder-type ...

Product Description

Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and ‘80s, the Creedmoor ladder-type sight is fully adjustable for windage and elevation and works equally well on cartridge rifles and muzzleloaders. Sight is precision machined from steel and attaches to tang with supplied setscrews and folds down when not in use. The Universal model is available in middle-range 2" and long-range 3" heights. The windage adjustment mechanism is on the eyepiece, allowing the eyepiece to dropped close to the base for close-in shots. The Soule model provides maximum adjustability to fit any hunting or target shooting conditions. Elevation is adjustable in precise increments of 1 MOA, and one full turn of the windage knob moves the point of aim left or right by 2½ MOA in ½ minute increments. Large knurled knob at the sight base allows fast, accurate return to center or previous setting. Choice of Short, Middle, and Long Range models. The “Goodwin” style sight was a popular sight for long range shooters in the late 1800s. The “flag” position allows for a very wide windage adjustment range of 1.26”. The elevation adjustment on the Goodwin has a range of 3.94”. With the Goodwin’s structure, the chamber can be easily accessed for cleaning or inspection. The Goodwin also has a “tilt” screw that allows the staff to be perfectly vertical at all elevations.


Big Book Catalog, Issue:71, Page:312

SPECS: Steel, blued. Elongated rear mounting hole allows installation on most rifles. Drilling and tapping of tang may be required. Distance between mounting holes 2.20”-2.29” (5.6-5.8cm). Mounting screws and installation instructions included.

Rifle Creedmoor Universal Long Range 3 Pedersoli Davide & C..

$155.99
Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and ‘80s, the Creedmoor ladder-type ...

Product Description

Named after the famous range on Long Island that hosted many long-range rifle competitions in the 1870s and ‘80s, the Creedmoor ladder-type sight is fully adjustable for windage and elevation and works equally well on cartridge rifles and muzzleloaders. Sight is precision machined from steel and attaches to tang with supplied setscrews and folds down when not in use. The Universal model is available in middle-range 2" and long-range 3" heights. The windage adjustment mechanism is on the eyepiece, allowing the eyepiece to dropped close to the base for close-in shots. The Soule model provides maximum adjustability to fit any hunting or target shooting conditions. Elevation is adjustable in precise increments of 1 MOA, and one full turn of the windage knob moves the point of aim left or right by 2½ MOA in ½ minute increments. Large knurled knob at the sight base allows fast, accurate return to center or previous setting. Choice of Short, Middle, and Long Range models. The “Goodwin” style sight was a popular sight for long range shooters in the late 1800s. The “flag” position allows for a very wide windage adjustment range of 1.26”. The elevation adjustment on the Goodwin has a range of 3.94”. With the Goodwin’s structure, the chamber can be easily accessed for cleaning or inspection. The Goodwin also has a “tilt” screw that allows the staff to be perfectly vertical at all elevations.


Big Book Catalog, Issue:71, Page:312

SPECS: Steel, blued. Elongated rear mounting hole allows installation on most rifles. Drilling and tapping of tang may be required. Distance between mounting holes 2.20”-2.29” (5.6-5.8cm). Mounting screws and installation instructions included.

Tc Contender Wgrs Receiver Rear Sight Williams Gun Sight.

$38.99
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep ...

Product Description

In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights.


Big Book Catalog, Issue:71, Page:308

Ar-15 Tactical Rear Sight 600 Meter Knights Armament.

$201.99
KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies ...

Product Description

KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies worldwide. This is because they are built to exacting tolerances, maintain their zero under adverse conditions and, when folded, have one of the lowest profile top-rail footprints in the industry.

The KAC 600 Meter Micro Rear Sight features a finger-adjustable, rotating drum that enables shooters to engage targets from 200 to 600 meters with both speed and accuracy.

Zeroing Tips 300 Meter Rear Sights: Place a target 25 meters down range and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, place a target 300 meters down range and confirm zero.

Zeroing Tips 600 Meter Rear Sights:  

  • 25/300 Meter Zero: Place a target 25 meters down range. Turn the rear sight drum to the “Z” setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, turn the rear sight drum to the “3” setting and confirm zero at 300 meters.
  •  50/200 Meter Zero: Place a target 50 meters down range. Turn the rear sight drum to the “2” setting and fire a 3 round group(s). Adjust the front sight post and rear sight windage knob until the desired point-of-aim/point-of-impact is achieved. If possible, place a target 200 meters down range and confirm zero.

NOTE: Once zeroed by one of the above methods, the rear sight’s 200, 300, 400, 500, and 600 meter range marks may be used for engaging targets at those distances. However, because the range markings are averaged between rifle and carbine barrel lengths, the exact point-of-aim/point-of-impact sight settings may differ a click or two for a given rifle. If possible, fire your rifle at known distances and record your exact + or − clicks for each range. The rear sight’s intermediate clicks between major range markings may also be used to engage targets at ranges such as 250 meters, 375 meters, etc.


AR-15, Issue:11, Page:068
Big Book Catalog, Issue:71, Page:073

SPECS: Fits - Picatinny rails.  Adjustable sights are calibrated for 5.56x45mm NATO cartridge.

Remington 4 Wgrs Receiver Rear Sight Williams Gun Sight.

$38.99
In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep ...

Product Description

In most cases, these sights utilize dovetail or existing screw holes on top of receiver to give guns the advantage of peep sights.


Big Book Catalog, Issue:71, Page:308

Browning Model 57 Sme Lyman.

$107.99
Rugged and precise sights, machined to hug the receiver for lowest line of sight, least protrusion. Audible-click, ¼" minute adjustments for elevation ...

Product Description

3 Styles Fit Hundreds Of Gun Models

Rugged and precise sights, machined to hug the receiver for lowest line of sight, least protrusion. Audible-click, ¼" minute adjustments for elevation and windage. Elevation slide is scribed in 3 minute increments. Quick release allows slide to be removed with a press of a button. Elevation stop screw permits instantaneous return to zero.


Big Book Catalog, Issue:71, Page:305

SPECS: Aluminum, black, anodized. Comes with two apertures, ½" (12.7mm) x .093" (2.3mm) and 5/8" (15.8mm) x .040" (1.1mm). Model 57 SME fits Browning Sako, Colt Sako, Enfield u.s. 1917, .30/06 British 1914 303B, JAP Arisaka, 6.5mm, 7.7mm, Mauser '98, 91, 94, 95, 96, 1904, 1909, 1936, G33/40, and Springfield 1903.

Winchester 1876 Rear Sight Marble Arms.

$118.99
Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better ...

Product Description

Adds a touch of authenticity to pump and lever action rifles, whether they’re used for hunting or Cowboy Action Shooting. Provides better sight definition and faster target acquisition in the field or on the range. Locates the aperture closer to the eye for a clear sight picture; longer sight radius increases accuracy. All steel construction with micrometer adjustments for windage and elevation. Folds to the rear for storage. Mounting screw set must be purchased separately.

Fitting chart for Standard Peep Sights

Find the correct mounting screw set for your model here.


Big Book Catalog, Issue:71, Page:311

SPECS: Steel, blued. Older guns may require drilling and tapping. Includes (2) ½" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, and (1) ¾" diameter aperture with .032" (.81mm) hole. Savage 99 will not fit late rifles with top safety. Late rifles with safety at trigger will require drilling and tapping. Mounting screw sets sold separately.

Leave a Reply