Web Analytics Made Easy -
    StatCounter

Ar-15 Small Pin Triggers, Straight Timney

If you find product , Deals.If at the time will discount more Savings So you already decide you want have Ar-15 Small Pin Triggers, Straight Timney for your, but you don't know where to get the best price for this Ar-15 Small Pin Triggers, Straight Timney . We already done the research and spend a lot of time for you. Ar-15 Small Pin Triggers, Straight Timney to find out where to get the best deal on Ar-15 Small Pin Triggers, Straight Timney.

Content:

Ar-15 Small Pin Triggers, Straight Timney.

$214.11
Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels ...

Product Description

Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. Available with standard solid trigger shoe with choice of 3 lb, 4 lb. or 4.5 lb. pull weight.

NOTE: For use in a polymer lower, a special plate is required which can be obtained directly from Timney at (623) 223-1111.


Big Book Catalog, Issue:71, Page:031

Ar-15 Drop-In Trigger Patriot Ordnance Factory.

$179.99
These single-stage, non-adjustable, drop-in triggers feature a clean trigger pull and are pre-assembled in a Hardcoat Anodized aluminum housing (complete with rubber ...

Product Description

Self-Contained Unit Delivers A Light, Crisp Pull

These single-stage, non-adjustable, drop-in triggers feature a clean trigger pull and are pre-assembled in a Hardcoat Anodized aluminum housing (complete with rubber urethane feet) for immediate competition, hunting, and tactical applications right out of the box. Carved from American A2 steel, the Trigger, Disconnect, and Hammer are all Nitride Heat-Treated to 70 Rockwell case hardness for ultimate strength and corrosion resistance. Pull weight for the standard trigger is 4.5lbs, while the E.F.P. model has a 4lb pull. The Enhanced Finger Placement (E.F.P.) trigger introduces a forward design that naturally guides the tip of your finger to the same resting place for a precise, smooth, consistant trigger squeeze every single time. The E.F.P.2 gives you the same great features as the E.F.P. but is moved back to give you extra room for wearing gloves.E.F.P.2 has a 4.5lb pull. Both models include custom-fit stainless steel KNS Precision™ Anti-walk Pins.


AR-15, Issue:11, Page:028
Big Book Catalog, Issue:71, Page:031

SPECS: A2 steel shoe, disconnector, and hammer, with matte black Nitride finish. Machined aluminum module housing, hardcoat anodized, red. Fits receivers with .154" trigger/hammer pin holes.

Mp5 Trigger Group (012) Replaces 21408 Heckler & Koch.

$764.99
Top Rated Supplier of Firearm Reloading Equipment, Supplies, and Tools - Colt

Product Description

FITS: MP5

Ar-15 Aagt Geronimo Trigger System Airborne Arms Llc.

$180.45 - $189.99
The Airborne Arms AAST Geronimo Trigger System is not a one-size-fits-all replacement trigger. The single-stage Geronimo trigger is built-around Airborne’s M.S.A.T. technology ...

Product Description

A Trigger That Adapts To the Shooter - Not the Other Way Around!

The Airborne Arms AAST Geronimo Trigger System is not a one-size-fits-all replacement trigger. The single-stage Geronimo trigger is built-around Airborne’s M.S.A.T. technology (Modular Shooter Adaptive Trigger) that allows it to be adapted to the shooting style of each shooter. Everything....OK, almost everything is adjustable, including hammer/trigger spring tension (hence trigger pull weight) and replaceable 7075 T6 aluminum trigger shoes.

The AAST Geronimo Trigger comes with a straight trigger shoe that is sized so it fits smaller hands, yet is still easily manageable by shooters with bigger mitts, too. A properly fitting trigger shoe improves shooter accuracy overall, and it even improves split times between shots, as well as accuracy during rapid fire sequences. This shoe can be interchanged with other shoe configurations from Airborne Arms (sold separately).

In addition, oversized anti-walk/rotation hammer and trigger pins keep your Geronimo trigger in place in the receiver, without wobble that can affect consistency and accuracy. Trigger pull weight is adjusted by swapping in and out the included springs until you find the pull that’s right for you.

  • Trigger available with Red or Black trigger shoe
  • Lightweight hammer design keeps lock time to the barest minimum
  • Key parts machined from A2 tool steel
  • Trigger shoe machined from a solid piece of 7075 T6 aluminum billet
  • Designed, tested, and manufactured entirely in the USA

Adaptability aside, the AAST Geronimo Trigger (named in honor of the U.S. Army 509th Airborne infantry regiment), give classic target trigger performance. It’s machined from high-grade A2 tool steel alloy, with hand-ground and polished contact surfaces to ensure a creep-free trigger pull and a crisp, abrupt, consistent break. Maybe best of all, Airborne Arms achieves all of this in a trigger that sells for less than $200. Get one today and see for yourself!

Tavor Super Sabra Trigger Geissele Automatics Llc.

$350.00
Drop-in replacement trigger gives your Tavor an upgraded, two-stage trigger pull that gives you smoother, more precise trigger control. Two-stage configuration allows ...

Product Description

Enhances Trigger Control For Precise Long-Range Targeting

Drop-in replacement trigger gives your Tavor an upgraded, two-stage trigger pull that gives you smoother, more precise trigger control. Two-stage configuration allows the Super Sabra to be light and controllable enough for accurate distance shots, but forgiving enough for CQB. The first stage is user-adjustable, so you can tune the first/second stage weight distribution without compromising the total pull weight. First stage can be adjusted to 3.5-5.5 lbs.; second stage is fixed at 2 lbs. Total pull weight can be adjusted from 5.5 to 7.5 lbs. The Super Sabra trigger pack is contained in an aluminum housing for easy installation, while keeping the tool steel internal components held in correct alignment. Nitride process finish on internal parts gives superb abrasion resistance. Lightning Bow® replaces the factory trigger shoe works with the Super Sabra to produce a truly two-stage trigger pull with a match-grade feel. A setscrew lets you remove the slack common to the Tavor factory trigger mechanism, producing a feel very similar to that of the M4 Carbine.

NOTE: This is a Generation 2 trigger pack that is fully compatible all IWI Tavor Rifles.


Big Book Catalog, Issue:71, Page:164

SPECS: Type: 2 Stage. 1 Stage Weight: 3.5-5.5 lbs. 2nd Stage Weight: 2.0 lbs. Total Pull Weight: 5.5-7.5 lbs.

Ar-15 Two Stage Triggers Cmc.

$210.00 - $230.00
The CMC 2-Stage trigger easily replaces your AR-15’s gritty, heavy factory trigger and gives you a smooth, consistent, two-stage pull with a ...

Product Description

The CMC 2-Stage trigger easily replaces your AR-15’s gritty, heavy factory trigger and gives you a smooth, consistent, two-stage pull with a crisp, clean break, and a short reset. It’s based on the drop-in trigger module originally designed by competition shooter Chip McCormick to provide all the advantages of a fine, match-grade trigger without the hand-fitting and trial-and-error.

These two-stage CMC triggers come pre-set from the factory with a variety of first ("set") and second ("release") stage pull weights, so you can choose a combination that’s best for your kind of shooting. And you can choose between a traditional Curved trigger shoe or an eye-catching Flat shoe with a different finger-to-trigger feel that some target shooters prefer.

As with all CMC triggers, the AR-15 2-stage model has a robust steel housing that retains all the internal components in proper alignment for easy, fast installation. Generous, precision-ground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is carefully adjusted at the factory for minimal take-up and over-travel.

Threaded sleeves provide ultra-smooth pivot surfaces for the hammer and trigger. Two slightly oversized center pins replace the standard, trigger/hammer pins to prevent trigger wobble, reduce friction, and save wear. Chicago-type screws eliminate pin walk.

Single-stage models are also available - see separate listing.

 


AR-15, Issue:11, Page:027
Big Book Catalog, Issue:71, Page:028
Sinclair, Issue:5B, Page:254

SPECS: Hammer/Trigger - Steel, blued finish. Housing - Steel, in-the-white. Fixed first/second stage pull weights are not user-adjustable. Includes two (2) Chicago-style center pins. Fits AR-15 with .154" diameter trigger and hammer pins. Also works with AR-308s that use AR-15 triggers.

M16 Full Auto Trigger Schmid Tool & Engineering Corp.

$15.99
Manufactured to correct mil-spec dimensions, this trigger is a high-quality replacement for use in any full-auto AR-15 or AR-308 rifle that uses ...

Product Description

Critical Part for Reliable Operation in Full-Auto AR-15 Rifles

Manufactured to correct mil-spec dimensions, this trigger is a high-quality replacement for use in any full-auto AR-15 or AR-308 rifle that uses an M16 "open back" trigger. Durable, hardened steel construction with surface ground engagement points for precise, reliable operation.

  • Open back, full-auto M16 type trigger only (no other components included)
  • Blued finish with surface ground engagement points
  • Fits full-auto AR-15 / M16 / AR-308 lower receivers
  • For use in law enforcement or registered civilian full auto rifles

Precision manufactured for excellent fit and performance, the our Full Auto M16 trigger gives you the confidence you need to get the job done in any operational or training situation. All NFA rules apply.
 

Ar-15 3 Gun Trigger Straight Elftmann.

$269.00
If you're in the market for upgrades to kick your competition-shooting rig to the next level, then the Elftmann Tactical AR-15 Straight ...

Product Description

Up Your Competition Game

If you're in the market for upgrades to kick your competition-shooting rig to the next level, then the Elftmann Tactical AR-15 Straight 3-Gun Trigger definitely needs to be on your list. This trigger is built with one goal in mind: winning competitions.

The Elftmann Tactical AR-15 Straight 3-Gun Trigger accomplishes this goal with a combination of features found nowhere else on the market. The entire assembly is built from A2 tool steel and aluminum, and one special feature of the trigger unit is the .043-inch double-wound piano-wire hammer spring that works to increase the speed of the AR-15's lock time. The trigger provides AR owners with a clean, crisp break that can only be compared to that of a custom 1911's.

  • Unit easily drops into any standard AR-15 lower receiver
  • Weight: 2 ounces
  • Trigger pull weight adjustable from 2.75-4 pounds
  • Uses 1/4-inch disconnector sear surface to eliminate issues with wear

The Elftmann Tactical AR-15 Straight 3-Gun Trigger installs with any standard mil-spec trigger pins and ensures shooters have a short pull and reset for the best in trigger performance.


Big Book Catalog, Issue:71, Page:028

Mossberg 100 Atr Short Action Trigger Timney.

$116.76
Self-contained drop in trigger. Lightweight 6061-T6 CNC Machined aluminum housing with Wire EDM cut, Heat treated steel trigger ...

Product Description

  • Self-contained drop in trigger.
  • Lightweight 6061-T6 CNC Machined aluminum housing with Wire EDM cut, Heat treated steel trigger and sear.
  • Two position, trigger blocking side safety.
  • Fully adjustable Sear Engagement, Over-travel, and pull weight from 1.5-4lbs.
  • Available in blue(black) and Nickel Plated.
  • Teflon nickel coated Sear to guarantee a lifetime of service.


Big Book Catalog, Issue:71, Page:166

SPECS: Fits - 100 ATR Short Action, 4x4 Short Action, MVP Short Action and ATR Night Train Short Action.

Leave a Reply